Jigs
More Products
Letterbox Jig
Cuts all popular letterbox sizes Uses 12.7mm cutter and 16mm guide bush All popular routers will work with the jig One piece ‘larger sized’ jig for stable and safe ... Read On...Belfast/Butler Sink Jig
Belfast/butler sink jig will rout recesses into worktops for single or double Belfast sinks It enables you to accurately rout a drip channel groove on the underside of the worktop and around ... Read On...Sink And Hob Aperture Jig
Sink and Hob Aperture Jig will enable you quickly and neatly, rout recesses and apertures in worktops to fit a range of sinks and hobs Use with a 12.7mm diameter x 50mm Tungsten Carbide Router ... Read On...Radius Jigs
Bespoke Radius jigs are available for cutting wall and base carcass units to fit concave doors and cutting carcass units and worktops for island units All radius jigs are made to order with a ... Read On...Drainer Jig
Dual function jig for drainage grooves and hot rods Routes sloping drainage grooves (of approximately 450mm in length) in solid timber work surfaces, such as might be used with a Belfast ... Read On...Staircase Jig
Cuts open tread and closed tread stair profiles Incorporates a universal router base with four radius bushes, so any popular router will work with the jig. Sliding pegs and bar are ... Read On...Multipurpose Jig
Use on Composite, Laminate and Solid Wood worktops Multipurpose jig is the first of its kind on the market and is suitable for use with a variety of worktop materials. Cuts 10mm inset for ... Read On...SupaPlus Jig
Use to cut worktops up to 1000mm width Supa Plus Jig has special quick ‘set up’ Unique quick reference guide engraved on jig face SupaPlus Jig 400, 450, 500, 550, 600, ... Read On...Contract Jig
Use to cut worktops up to 700mm width Currently Europe’s best selling jig Made from 12mm hard wearing compact laminate 700mm Contract Jig Cuts 250, 300, 400, 450, 500, ... Read On...Combination Hinge And Lock Jig
Combi Hinge and Lock Jig New 2 in 1 Jig that will cut Door Hinges and Locks in one. Uses a 12.7mm cutter and 16mm guide bush Single piece jig ensures level operating, quick set up and no ... Read On...Hinge Jig
Will recess 75mm and 100mm hinges in doors and door frames Uses 12.7mm cutter and 16mm guide bush The recess will be 20mm for a 75mm hinge and 30mm for 100mm hinge. It will ... Read On...Compact Hinge Jig
Will recess 76mm and 102mm hinges in doors and door frames Uses 12.7mm cutter and 16mm guide bush The recess will be 20mm for a 76mm hinge and 30mm for 102mm hinge. The jig will ... Read On...Compact Lock Jig
Lock Jig Compact Cuts 5 lever sash, dead and mortice catches. Uses 12.7mm cutter and 16mm guide bush. Elongated securing clamps for easier operation and safer working ... Read On...Back...